Czajkowski VT 300
Work where the problem really is
The VT 300 loosens the soil below the typical compaction zone that forms after years of tillage at the same depth. You go down exactly where you detect the plough pan and break it up without disturbing the humus layer above.
Working depth
Full control over the reach of the operation — vertical loosening below the compacted layer, without inverting or mixing the profile.
Under-frame clearance
This much free space is available for the soil and crop residue lifted by the tines to pass freely under the machine without clogging — even at maximum working depth.
Only 3 working parts to replace
The soil-contact zone is formed by three replaceable parts, each replaced separately — you only pay for what has actually worn out. The blade and shield are additionally reversible through 180°, doubling their service life.
| Part | Function |
|---|---|
| Chisel (80 mm wide) | It penetrates the soil and guides the tine at the set depth. |
| Rotating blade | It cuts and loosens the compacted soil layer. |
| Tine shield (rotating) | It protects the tine from abrasive wear. |
Key features
- ✓Deep rooting of the plants.
- ✓V-shaped frame layout – lower resistance and no horizontal compression of the soil structure.
- ✓The vertical shape of the working parts eliminates the effect of mixing and inverting the soil.
- ✓Maximum working depth: 60 cm.
- ✓Independent mounting of 5 tines — any of them can be taken out of work.
Packer rollers
A choice of five roller variants — you can match the pressing and crushing to your soil type and working conditions. Czajkowski recommends the DD ring roller and the U-profile roller.
DD ring roller
Ø 600 mm
U-profile roller
Ø 600 mm
Spiked roller
tandem
Tubular roller
Ø 600 mm
Rubber roller
Ø 500 mm
Technical specification
Such a low power demand is possible thanks to the option of switching off individual tines. Actual demand depends on the soil profile, working depth and soil moisture.
| Working width | 3.0 / 4.0 / 6.0 m |
|---|---|
| Version | mounted |
| Frame | V-type |
| Number of tines | 5 (spacing 5×60 cm) |
| Tine protection | hydraulic non-stop |
| Working depth | up to 60 cm |
| Under-frame clearance | 89.2 cm |
| Chisel width | 80 mm |
| Standard roller | U-profile Ø 600 mm |
| Min. power demand | from 200 HP |
| Own weight | 2100 kg |